Payment & Shipping Terms:
|Working Voltage:||DC5-12V||Output Signal:||Rectangular Pulse Wave|
|Detection Distance:||0.2-1 Mm||No-load Current:||10mA|
|Output Current:||20mA||Response Frequency:||10Kh|
high speed sensor,
vw hall effect sensor
Hall-effect speed sensor for zongshen/Loncin/Lifan motorcycle
2.Hall effect sensor
|Output signal||rectangular pulse wave|
|Detection distance||0.2-1 mm|
Speed sensors are commonly referred to as transmission speed sensors because they are connected to the transmission. When the transmission is being used, the speed sensors will detect its gear ratio. You will actually find two speed sensors in the transmission of each new vehicle out today. One speed sensor is called the input shaft speed sensor and the other is the output shaft speed sensor. These two sensors work together to relay information back to the engine control unit.
The function of the input shaft speed sensor is to keep track of the transmission’s input shaft speed. The clutch connects the input shaft to the engine which allows it to turn at the same speed. But the gears of the transmission allow you to reduce the speed of the wheels so that they are not always going as fast as the engine’s speed. This is where the output shaft comes into play because it is linked to the drive wheels and changes speed based on the gear you select. The output shaft speed sensor detects the speed of the drive wheels and sends this information back to the engine control unit.
Together these two shafts allow the wheels to rotate at a speed that is manageable while the engine continues to run at a speed that makes it perform efficiently. This would not be possible without functional input and output shaft speed sensors. Once the engine control unit receives this information, it compares the two different speeds of the shafts and then automatically sets the appropriate gear that is needed to sustain a smooth driving experience.
PRODUCT GURANTEE POLICY
For the period of two years or 50,000 kilometers,whichever occcurs first,from the date of shipment,any shock absorber from CHONGQING SKILL SCIENCE&TECHNOLOGY CO.,LTD,found to be defrctive in material or workmanship in below cases,we will replace without charge,or return the equal money back:
1. Installation sizes are wrong;
2. Oil or gas leakage;
3. Iron was rusty after painting;
4. welding position discount;
5. Damping force was out of test report range,±20% damping force rate (National sdandard) should be allowed and born by the purchaser;
6. 0.5% of failure rate should be allowed.
Why choose Skill
As a manufacturer,we can guarantee the quality control, delivery time and customer‘s service.
2. Brand Awareness
We have a good reputation and a high credibility with 14 years history.
3. Fair Price
Enter into direct business with us would save your cost.
4. OEM Accepted
We accept your specific order and do everything we can to meet your requirement.
Contact Person: Karen Yang